Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Клактондық – археологтардың Еуропалық шақ тасты құрал жасау индустриясына берген атауы, ол Хоксниан, Миндел-Рис немесе Хольштейн кезеңдері деп белгілі мұз аралық кезеңнің басындағы (шамамен 400 000 жыл бұрын) кезге жатады. Клактондық құралдарды Homo heidelbergensis жасаған. Ол 1911 жылы Эссекс графтығындағы Клэктон-он-Сидегі палеоканалда Хазледин Уоррен жасаған 400 000 жылдық қазбалардың құрметіне аталған. Онда табылған заттардың ішінде шақ тасты кескіштер, шақ тасты жаңқалар, өңделген ағаш мойынның ұшы, сондай-ақ алып піл мен бегемоттың қалдықтары бар. Құралдардың басқа мысалдары Барнфилд Пит және Риксонның Пит, Кенттегі Суонскомбе және Саффолк графтығындағы Барнхамның жанындағы жерлерде табылған; Солтүстік Еуропа бойынша ұқсас индустриялар анықталған. Клактондық индустриясы шақ тастың қалың, дұрыс емес жаңқаларын соғуды қамтыды, содан кейін ол кескіш ретінде қолданылды. Жаңқалар қарапайым пышақтар немесе сырғыштар ретінде пайдаланылған. Олдовандық құралдардан айырмашылығы, кейбіреулері ойылып, тұтқаға немесе білікке бекітілгенін көрсетеді. Ретуш сирек кездеседі және жаңқалардағы айқын соққының ізі тас соққышпен қолдануды көрсетеді. 1972 жылы Нил өзенінің жағалауындағы 100 футтық террасадағы қазбаларға негізделген Клактондық индустриясының «Мысырлық нұсқасы» ұсынылды.
The Clactonian is the name given by archaeologists to an industry of European flint tool manufacture that dates to the early part of the interglacial period known as the Hoxnian, the Mindel Riss or the Holstein stages (c. 400,000 years ago). Clactonian tools were made by Homo heidelbergensis. It is named after 400,000 year old finds made by Hazzledine Warren in a palaeochannel at Clacton on Sea in the English county of Essex in 1911. The artifacts found there included flint chopping tools, flint flakes and the tip of a worked wooden shaft along with the remains of a giant elephant and hippopotamus. Further examples of the tools have been found at sites including Barnfield Pit and Rickson's Pit, near Swanscombe in Kent and Barnham in Suffolk; similar industries have been identified across Northern Europe. The Clactonian industry involved striking thick, irregular flakes from a core of flint, which was then employed as a chopper. The flakes would have been used as crude knives or scrapers. Unlike the Oldowan tools from which Clactonian ones derived, some were notched, implying that they were attached to a handle or shaft. Retouch is uncommon and the prominent bulb of percussion on the flakes indicates use of a hammerstone. An "Egyptian version" of the Clactonian industry was proposed in 1972, based on excavations on the banks of the Nile River, at the 100 foot terrace.
Клактондық дау
Клактондық өнеркәсіп Ашеулдық өнеркәсіппен қатар өмір сүрген болуы мүмкін, олар бірдей негізгі техникаларды қолданған, бірақ сонымен қатар қолбалта технологиясына ие болған; екі жақты кремний өзегін өңдеу арқылы жасалған құралдар. 1994 жылғы мақалада «Клактондық» өнеркәсібін Ашеулдықтан ерекше дәстүр ретінде қарастырудың негізділігі күмәндалған. Клактондық өнеркәсіп шын мәнінде Ашеулдықпен бірдей болуы мүмкін, және оның құралдары Ашеулдықтар болғандықтан, оларды жасаған кезде қолбалтаға қажеттілік болмаған адамдар жасағандықтан ғана әртүрлі деп бағаланған. Ортаның өзгешелігі және жергілікті шикізаттың сапасы мен қолжетімділігі екі өнеркәсіп арасындағы айырмашылықтарды түсіндіре алады, бұл айырмашылықтар бұрын тек қазіргі заманғы археологтар ғана байқаған. Алайда, 2004 жылы Кенттегі Southfleet Road High Speed 1 учаскесінде табылған сойылған плейстоцендік пілдің қазба жұмыстары кезінде көптеген Клактондық кремний құралдары табылды, бірақ қолбалталар жоқ еді. Пілдің денесін бөлу үшін қолбалта тікұшақтан гөрі тиімді болғандықтан, бұл Клактондықтың жеке өнеркәсіп екендігінің күшті дәлелі саналады. Аймақта жеткілікті сапалы кремний болған, сондықтан пілді кескен адамдар одан да күрделі екі жақты қолбалта жасау біліміне ие болмаған болуы мүмкін. Клактондықты тәуелсіз өнеркәсіп ретінде қолдайтындар, оның аномальды Ашеулдық өнеркәсіп екендігіне нақты дәлелдердің жоқтығына назар салады. Ашеулдық ықпалына сілтеме жасайтын санаулы екі жақты Клактондық құралдардың (бар болған жағдайда) нақты шығу тегі даулы. Клактондықтың Ашеулдықтан кейін дамитын дәстүрлі хронологиясы да күшейе түсуде, өйткені Ашеулдық құралдары Сассекстегі Боксгроув және Саффолктегі Хай Лоджде табылған. Бұл табыстар Англия кезеңіне, Хоксний кезеңінен бұрынғы мұз басу кезеңіне, демек Клактондық кезеңінен бұрынғы шөгінділерге жатады. Олар жеке өнеркәсіптер ме, жоқ па, «Клактондық» және «Ашеулдық» тас құрал жасаушылардың бір-бірімен мәдени байланыста болған сияқты көрінеді.
The Clactonian industry may have co existed with the Acheulean industry, which used identical basic techniques but which also had handaxe technology; tools made by bifacially working a flint core. The justification for considering "Clactonian" as a tradition distinct from Acheulean has been called into question in a 1994 article. The Clactonian industry may in fact be the same thing as the Acheulean and only assessed as being different due to its tools being Acheulean ones made by individuals who had no need for handaxes on the occasion that they made them. Differences in environment and the availability and quality of local raw materials may account for the differences between the two industries, which, at one point it was inferred, were only perceived by modern archaeologists. However, the 2004 excavation of a butchered Pleistocene elephant at the Southfleet Road site of High Speed 1 in Kent recovered numerous Clactonian flint tools but no handaxes. As a handaxe would have been more useful than a chopper in dismembering an elephant carcass it is considered strong evidence of the Clactonian being a separate industry. Flint of sufficient quality was available in the area and it is likely that the people who carved up the elephant did not possess the knowledge to make the more advanced bifacial handaxe. Proponents of the Clactonian as an independent industry point to the lack of concrete evidence in favour of it being an anomalous Acheulean industry. The precise provenance of the few attributed bifacial Clactonian tools (which point to Acheulean influence) is in dispute. The traditional chronology of Clactonian being followed by Acheulean is also being increasingly challenged since finds of Acheulean tools were made at Boxgrove in Sussex and High Lodge in Suffolk. These finds came from deposits connected with the Anglian Stage, the glaciation that preceded the Hoxnian Stage and therefore would have preceded the Clactonian. Whether or not they are separate industries it would seem that the 'Clactonian' and 'Acheulean' stone tool makers would have had cultural contact with each other.