Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Кіріспе
Мұз немесе қардың шөгінді мұздық нығызы, үстіне топырақ қабаты жабылған оқшаулағыш қабатпен.
Depositional glacial feature of ice or snow with an insulating layer of dirt
Топырақ конусы – мұздық нығызының бір түрі. Топырақ конустары шын мәнінде толығымен топырақтан жасалмайды. Олардың ішкі ядросы мұз, қар немесе фирнадан тұрады, ол материалмен жабылып, оқшауланады. Материалдың қалыңдығы жеткілікті болса, ол төмендегі ядроны абляциядан қорғайды. Ядроны оқшаулау үшін қажетті материал қалыңдығы "критикалық қалыңдық" деп аталады. Егер материалдың қалыңдығы критикалық қалыңдықтан кем болса, ол абляция арқылы ядроның эрозиясын жылдамдатады. Бұл "жайындама абляция" деп аталады. Конус содан кейін еруге және кішіреюге бастайды.
A dirt cone is a type of depositional glacial feature. Dirt cones are not actually made entirely of dirt. They have a core of ice, snow, or firn that gets covered with material and insulated. The material, if it is thick enough, will protect the underlying core from ablation. The thickness of material needed to insulate the core is called the “critical thickness.” If the material is less thick than the critical thickness, it will actually speed up erosion of the core through ablation. This is called “indirect ablation.” The cone would then begin melting and shrinking away.
Құрылу
Құрғақ конустар жарық немесе ойыс жерлерде пайда болады. Топырақ, шаң немесе мореналық материал мұздықтағы жарыққа түсіп, уақыт өте жиналады. Сонымен қатар, айналасындағы мұздық абляция арқылы төмендейді, нәтижесінде ласқа толы жарық ашылып, материал мұздықтың бетіне тарала бастайды. Мұздықтың қалған бөлігі материал үйіндісі жоғарылап, биіктейген сайын төмендеуін жалғастырады. Материалдың астында қалған мұз, қар немесе фирн оқшауланып, эрозиядан қорғалады. Қабырғалары тұрақсыз бұрышқа дейін тіктеліп, конус пішінін қалыптастыра бастайды. Материал төмен құлап, қабырғаларды қорғайды. Жоғарына қанша материал қосылса, өзегі сонша оқшауланады. Уақыт өте, сырты материал қабатымен, ал іші мұз, қар немесе фирн ядросы бар конусқа айналады. Конус жоғарғы жағындағы материал әдетте, бүйірлеріндегіден қалың болады. Кейбір конустардың биіктігі бірнеше сантиметрге жетеді, ал кейбіреулері 30 метрге дейін биік болуы мүмкін. Ірі топырақ конустары көбінесе бірігіп кеткен (еріген) бірнеше конустардан тұрады. Мұз қаптамасы немесе мұздық ерігенде, бетіндегі конустар бірігіп, ақырында толық бірігеді. Бұл мұз ядросын нығайтады және сыртында қалың материал қабатын құрап, қатайған ядроны эрозиядан қорғайды. Олар бір қыс мезгілінде немесе бірнеше маусым бойында қалыптасуы мүмкін. Олардың пайда болуы үшін тек қалдықтар мен мұз ғана қажет.
Dirt cones begin forming in a crevasse or a hollow. Dirt, dust, or moraine deposit material will fall into the crevasse in the glacier and build up over time. At the same time, the surrounding glacier lowers through ablation until the dirt filled crevasse is exposed and the material begins to spread out of top of the glacier. The rest of the glacier continues to lower as the material mound grows higher and taller. Any ice, snow, or firn trapped under the material will be insulated and protected from erosion. It begins forming a conical shape as the sides steepen to an angle that is unstable. Material falls down and protects the sides. The more material is added to the top, the more insulated the core becomes. Over time, it becomes a cone with a layer of material on the outside and a core of ice, snow, or firn on the inside. The material at the top of the cone is generally thicker than the material on the sides of the dirt cone. Some cones are only a few centimeters tall, while others can be up to 30 meters high. The larger dirt cones are commonly multiple cones that have fused (melted) together. As an ice sheet or glacier melts and retreats, the cones on the surface are brought together and eventually fuse together. This strengthens the ice core and creates a thicker layer of material on the outside to protect the hardened core from eroding. They can develop in one winter season or they can be a product of several seasons. All they need to form is debris of some sort and ice.