Ағылшыншамен салыстырыңыз: абзацты басыңыз — түпнұсқа терезеде ашылады. Абзац астындағы EN түймесі оны мәтін ішінде көрсетеді.
Мазмұны
Кіріспе
Музыкада үрмелі аспаптың (соның ішінде ағаш және қола үрмелі аспаптардың) ішкі кеңістігі – ауаның өтетін жолы. Осы ауа тербеліске келгенде дыбыс пайда болады. Ішкі кеңістіктің пішіні аспаптың тембріне күшті әсер етеді.
In music, the bore of a wind instrument (including woodwind and brass) is its interior chamber. This defines a flow path through which air travels, which is set into vibration to produce sounds. The shape of the bore has a strong influence on the instrument's timbre.
Бұрыштың пішіні
Конус және цилиндр – жел аспаптарының ішкі кеңістігін сипаттау үшін қолданылатын екі идеалданған пішін. Басқа пішіндер көбінесе қолданылмайды, себебі олар диссонанстық, агармониялық обертондыларды және музыкалық емес дыбысты тудырады. Аспаптар негізінен конустық немесе цилиндрлі түтікшеден тұруы мүмкін, бірақ олар ауыздықтан басталып, тез кеңейетін "жаңқа" немесе "қоңырау" түрінде аяқталады. Бұл жаңқа аспап пен ауа арасындағы акустикалық кедергінің айырмашылығын азайтады, соның арқасында аспап дыбысты ауаға тиімдірек жеткізе алады. Бұл пішіндер аспаптың тембріне байланысты гармоникалардың айқындығына әсер етеді. Ауыздықтан кеңейетін ішкі кеңістік тынысқа қарсылықты азайтады, ал ауыздықтан тарылатын ішкі кеңістік, цилиндрге қарағанда, оны арттырады.
The cone and the cylinder are the two idealized shapes used to describe the bores of wind instruments. Other shapes are not generally used, as they tend to produce dissonant, anharmonic overtones and an unmusical sound. Instruments may consist of a primarily conical or cylindrical tube, but begin in a mouthpiece, and end in a rapidly expanding "flare" or "bell". This flare reduces the acoustic impedance mismatch between the instrument and the air, allowing the instrument to transmit sound to the air more effectively. These shapes affect the prominence of harmonics associated with the timbre of the instrument. A bore that flares from the mouthpiece reduces resistance to the breath, while a bore that narrows from the mouth increases it, compared to a cylinder.
Ағаш желдері
Ағаштан жасалған үрлеу аспаптарының ішкі бөліктерінің қимасы нақты конус немесе цилиндрден өзгеше болуы мүмкін. Мысалы, обой мен обо-да-аморе бірдей дыбыс биіктігінде болғанымен, олардың соңғы бөлігіндегі құбырларының пішіні әртүрлі. Сәйкесінше, обойдың дыбысы обо-да-аморенің "толық" дыбысына қарағанда "тегіс" деп сипатталады. Үрлеу аспаптарының дыбыс реңін ішкі бөлігінің пішіні анықтаса да, аспаптың сыртқы геометриясы олардың дыбысына көбінесе аз әсер етеді. Сонымен қатар, үрлеу аспаптарының сыртқы пішіні олардың ішкі бөлігінің пішінімен үнемі сәйкес келе бермейді. Мысалы, обой мен кларнет сырттан ұқсас көрінсе де, обойдың ішкі бөлігі конустық, ал кларнеттің – цилиндрлі болады. Барокко диктофонының ішкі бөлігі "кері" конус тәрізді, яғни басында кең, аяғында тар. Қазіргі заманғы диктофондардың көпшілігі де сондай конустық пішінге ие, себебі олар барокко диктофондарына өте ұқсас жасалған. Дегенмен, қайта өрлеу дәуірінен, орта ғасырлардан және сондай-ақ заманауи диктофондардың кейбіреулерінде цилиндрлі ішкі бөлік кездеседі. Кейбір қалайы флажолеттердің де кері конустық пішіні бар.
Sections of the bores of woodwind instruments deviate from a true cone or a cylinder. For example, although oboes and oboes d'amore are similarly pitched, they have differently shaped terminal bells. Accordingly, the voice of the oboe is described as "piercing" as compared to the more "full" voice of the oboe d'amore. Although the bore shape of woodwind instruments generally determines their timbre, the instruments' exterior geometry typically has little effect on their voice. In addition, the exterior shape of woodwind instruments may not overtly match the shape of their bores. For example, while oboes and clarinets may outwardly appear similar, oboes have a conical bore while clarinets have a cylindrical bore. The bore of a baroque recorder has a "reversed" taper, being wider at the head and narrower at the foot of the instrument. Most contemporary recorders also have such a conical bore as they are made very similar to baroque recorders. However, multiple renaissance, medieval and also modern recorders have a cylindrical bore. Some tin flageolets also have a reverse taper.