Сульфат бария: свойства, применение и характеристики

Inorganic chemical compound
Chembox
|Verifiedfields = changed
|Watchedfields = changed
|verifiedrevid = 476997146
|ImageFile = Bariumsulfatpulver. png
|ImageFile1 = Barium sulfate 2D. png
|ImageSize1 = 225px
|ImageName1 = Chemical structure of barium sulfate
|ImageFileL2 = Barite unit cell 3D vdW. png
|ImageNameL2 = 3D model of barium sulfate
|Section1=
|Section2=
|Section3=
|Section4=Chembox Thermochemistry
|DeltaHf = −1465 kJ/mol
|Entropy = 132 J/(mol·K)
|REL = TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp)

About 80% of the world's barium sulfate production, mostly purified mineral, is consumed as a component of oil well drilling fluid. It increases the density of the fluid, increasing the hydrostatic pressure in the well and reducing the chance of a blowout.

Barium sulfate in suspension is often used medically as a radiocontrast agent for X ray imaging and other diagnostic procedures. It is most often used in imaging of the GI tract during what is colloquially known as a "barium meal". It is administered orally, or by enema, as a suspension of fine particles in a thick milk like solution (often with sweetening and flavoring agents added). Although barium is a heavy metal, and its water soluble compounds are often highly toxic, the low solubility of barium sulfate protects the patient from absorbing harmful amounts of the metal. Barium sulfate is also readily removed from the body, unlike Thorotrast, which it replaced. Due to the relatively high atomic number (Z = 56) of barium, its compounds absorb X rays more strongly than compounds derived from lighter nuclei.

The majority of synthetic barium sulfate is used as a component of white pigment for paints. In oil paint, barium sulfate is almost transparent, and is used as a filler or to modify consistency. One major manufacturer of artists' oil paint sells "permanent white" that contains a mixture of titanium white pigment (TiO2) and barium sulfate. The combination of barium sulfate and zinc sulfide (ZnS) is the inorganic pigment called lithopone. In photography it is used as a coating for certain photographic papers. Researchers used it as an ingredient in paint that reflects 98.1% of solar radiation, allowing surfaces to which it has been applied to stay cooler in sunlit conditions. Commercially available white paints only reflect 80 90% of solar radiation. By using hexagonal nanoplatelet boron nitride, the thickness of a coat of this type of paint was reduced to 0.15 mm. The light sensitive silver halide emulsion is then coated over the baryta layer. The baryta coating limits the penetration of the emulsion into the fibers of the paper and makes the emulsion more even, resulting in more uniform blacks. Further coatings may then be present for fixing and protection of the image. Baryta has also been used to brighten papers intended for ink jet printing.

Barium sulfate is commonly used as a filler for plastics to increase the density of the polymer in vibrational mass damping applications. In polypropylene and polystyrene plastics, it is used as a filler in proportions up to 70%. It has an effect of increasing acid and alkali resistance and opacity. Such composites are also used as X ray shielding materials due to their enhanced radio opacity. In cases where machinability and weight are a concern, composites with high mass fraction (70–80%) of barium sulfate may be preferred to the more commonly used steel shields.

Barium sulfate is used in soil testing. Tests for soil pH and other qualities of soil use colored indicators, and small particles (usually clay) from the soil can cloud the test mixture and make it hard to see the color of the indicator. Barium sulfate added to the mixture binds with these particles, making them heavier so they fall to the bottom, leaving a clearer solution. In colorimetry, barium sulfate is used as a near perfect diffuser when measuring light sources. In metal casting, the moulds used are often coated with barium sulfate in order to prevent the molten metal from bonding with the mould. It is also used in brake linings, anacoustic foams, powder coatings, and root canal filling. Barium sulfate is an ingredient in the "rubber" pellets used by Chilean police. This together with silica helps the pellet attain a 96.5 Shore A hardness.

Barium sulfate is reduced to barium sulfide by carbon. The accidental discovery of this conversion many centuries ago led to the discovery of the first synthetic phosphor.

Although soluble salts of barium are moderately toxic to humans, barium sulfate is nontoxic due to its insolubility. The most common means of inadvertent barium poisoning arises from the consumption of soluble barium salts mislabeled as BaSO4. In the Celobar incident (Brazil, 2003), nine patients died from improperly prepared radiocontrast agent. In regards to occupational exposures, the Occupational Safety and Health Administration set a permissible exposure limit at 15 mg/m3, while the National Institute for Occupational Safety and Health has a recommended exposure limit at 10 mg/m3. For respiratory exposures, both agencies have set an occupational exposure limit at 5 mg/m3.